多工位圓刀模切機（工位可選1-20個工位）
DCR-1020Ten-station Rotary Die Cutting Machine
設計師的解讀
多工位圓刀模切機用途
Application
DCR-12可以進行多工位圓刀套位模切、材料復合，本設備適用于各種膠帶、保護膜、泡棉、網布、銅鋁箔、背光源模組、柔性線路板、醫療和衛生等模切行業。
DCR-1020 is suitable for multi-station set position die cutting, laminating. This machine is applicable for adhesive tape, protection film, foam, mesh cloth, aluminumand copperfoil, back light module, flexible circuit board, medicine and hygiene field, etc.
設計亮點
特點
Feature
1．主操作采用電腦觸摸式工控機，圖形顯示，直觀明了，操作便捷可同時使用鍵盤和鼠標以及用手觸摸。
The main operation interface adopts touch panel, with picture display for easy operation.
Keyboard, mouse and hand touch are all available.
2．可存儲500種以上SOP數據，提高標準程度，對員工的經驗依賴程度降低，并可減少調刀過程材料浪費率60%以上。
It can save more than 500 kinds of SOP data, improve standard level, and reduce dependence on
Operator’s experience and reduce more than 60% material waste.
3．所有收放料軸分別由馬達獨立驅動，收放料、正反轉自由，靈敏度張力傳感軸反饋控制，使材料運行平穩，順暢。
All unwind & rewind shafts are driven separately by servo motors. The unwinding, rewinding, straight & reverse rotation are more flexible and controlled by high sensitivity tension sensor shaft’s feedbackto ensure smooth running.
4．所有刀座的運動控制由德國Lenz的伺服馬達驅動，扭力足夠大，加減速穩定，獨立可調，套切精度可達±0.075mm。
All cutter holder’s movements are controlled byGerman Lenz servo motor with enough torsion, stable acceleration and deceleration, precision can be ±0.075mm.
5．控制系統由德國Lenz PLC和同步控制器共同完成控制，同步性高。
The control system is operated byGerman Lenz PLC and logic movement controller with better synchronism.
6.整機具備異步模切功能，可節省模切材料。
Machine has the function of asynchronous laminating which can save material.
7.帶移動式輔助放料軸。
Movable auxiliary unwind shaft.
8．配備主放料EPC糾偏裝置,使材料進入刀座穩定。
Main unwind EPC system can stabilize the material feeding into blade holder.
9．斷料檢測（包括透明料）停機或報警，減少材料浪費。
Fracturing detecting (including transparent material) machine stop or alarming to reduce material waste.
10．配備CCD檢測裝置,生產過程中可實時檢測產品的套位精度, 然后反饋給PLC下達指令給伺服電機進行尺寸調整。
CCD testing system can test position precision all the time during the whole process and then feedback to PLC which send orders to servo motors to adjust position.
11.配備色標電眼，滿足生產印刷產品套位的要求。Color code electric eye tracking system can meet the demand of position precision of produce printing product.
12.具備在一臺機器上可以同時生產兩種不同種類的產品，提高機器的使用率。
Machine can process two different types of materials at the same time which improve capacity utilization.
多工位圓刀模切機特點說明:
Features
主機加減速平穩,套位精度不變,并配有CCD相機檢測微調功能,充分保證模切精度, 同時具備斷料停機功能、色標電眼功能、同時生產兩種產品的功能，使用工業電腦操作同時具備觸摸及鍵鼠操作方式,操作靈活,便捷。
Stable speed acceleration and deceleration. Unchangeable p